Solid Starter Mounts Available for gear reduction starters

4x4's and 6x6's, parts, services and goods for sale. Dealers posting vehicle ads must donate something to the cause.
Post Reply
bikmakr
United States of America
Posts: 96
Joined: Thu Mar 27, 2014 1:18 pm
Location: Livermore, Ca. Minden, NV
Contact:

Solid Starter Mounts Available for gear reduction starters

Post by bikmakr » Sun Jun 17, 2018 10:59 pm

I designed and made up a small run of these solid mounts. There have been instances of damage caused by the new higher torque starters shifting old or worn rubber starter mounts. In my case, it ruined my ring gear. I'm not sure why the designers ever came up with a "soft" mount. I suspect to isolate the starter motor from engine vibrations. I can't think of another vehicle that uses one.

This "kit" replaces the following stock items:

7121090142 ground strap $31.10
7121090162 rubber mount $82.02
9801362 bolt $.75
9001364 bolt $.85
7121090222 nut plate $22.59

Total $137.31

So for $110 plus actual discounted UPS, you can have a rigid set-up. PM me if you are interested.
Sorry, ships to US only. Overseas shipments can be too time consuming.
POL_6207.JPG
POL_6207.JPG (748.95 KiB) Viewed 475 times
POL_6205.JPG
POL_6205.JPG (761.55 KiB) Viewed 475 times

mmcc100
United States of America
Posts: 31
Joined: Sat Apr 29, 2017 9:54 pm
Location: Georgia USA

Re: Solid Starter Mounts Available for gear reduction starters

Post by mmcc100 » Thu Feb 14, 2019 8:49 am

Are these still available? I ordered a new gear reduction starter... I assume this will work for it. I haven't even looked at the condition of the old rubber mount, but considering any stress/damage prevention.

bikmakr
United States of America
Posts: 96
Joined: Thu Mar 27, 2014 1:18 pm
Location: Livermore, Ca. Minden, NV
Contact:

Re: Solid Starter Mounts Available for gear reduction starters

Post by bikmakr » Thu Feb 14, 2019 11:02 pm

Yes, I have about 12 sets left. Email me directly for info.
Brandtw1@yahoo.com

User avatar
TechMOGogy
Canada
Posts: 2756
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Solid Starter Mounts Available for gear reduction starters

Post by TechMOGogy » Fri Feb 15, 2019 2:37 pm

Not sure how I missed this one but thanks for bumping it back up.
email sent
Thanks,
Dan
72 Pathfinder | 75 710M 2.7i | 94 350GDT | 96 350GDT Worker

mmcc100
United States of America
Posts: 31
Joined: Sat Apr 29, 2017 9:54 pm
Location: Georgia USA

Re: Solid Starter Mounts Available for gear reduction starters

Post by mmcc100 » Sat Feb 16, 2019 10:57 am

Awesome! Email sent for an order.

Post Reply