SOLD! : Pair of Front Antenna Tube Brackets

[pcolette]

I have a pair of the original brackets that mount on the front panel below the windshield of a 710 or 712. They're in good shape and complete exxcept for the antenna storage tubes.

I've searched but have found no clue as to their value, so please make an offer if interested. I think I can get them into a USPS large flat rate box.

IMG_0139.jpeg (1.62 MiB) Viewed 1845 times

IMG_0138.jpeg (1.86 MiB) Viewed 1845 times

[Jim Molloy]

Paul C.,
Can you provide the inside diameter of the clamps and the base angled "cups"? I have no Pinzgauer but deploy a telescoping flagpole at various events. I secure it to the back of our Volvo TGB1314A. Depending on the dimensions of the units you have, I may be able to put them to very good use.

https://www.youtube.com/watch?v=scANd8gICrw

Thank you and take care.
Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com

[Jim Molloy]

Paul C.,
Would you accept $75 USD for the pair?
Jim Molloy

[pcolette]

Jim,

The clamps and the cup end have foam lining glued to the metal. The i.d. of the clamps is 3 3/8" including the foam. If the foam were removed it would be 3 5/8".
The i.d. of the cups is ~ 3.5" and with the foam removed would be about 3 5/8".

$75.00 USD for the pair is fine.

Paul

[Jim Molloy]

Paul C.,
Fantastic! I just checked the measurements of the flagpole and and these clamps should be a good fit. Does payment via PayPal work for you? If so, all I need your e-mail address.
Take care.
Jim Molloy

[pcolette]

Jim,
PM sent.

[Jim Molloy]

Paul,
Return PM send to you.
THANK YOU!
Jim