4x100 and wobble nuts?

Mechanical issues? Check here.

Moderator: TechMOGogy

Post Reply
User avatar
Posts: 1849
Joined: Fri May 01, 2009 1:30 pm
Location: Toronto Regional Area

4x100 and wobble nuts?

Post by audiocontr » Thu Apr 19, 2018 12:27 pm

Would ya? I mean, what could possibly go wrong?
1973 712m
(2) 1968 Haflingers 1 For Sale
1978 GMC Palm Beach
2001 F250 Diesel and trailer

User avatar
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Re: 4x100 and wobble nuts?

Post by Haf-e » Thu Apr 19, 2018 1:07 pm

Lots of people use them - but I don't know...

I actually have a set of set of steel wheels from a TR7 - which are 4x96 and use larger studs - they fit on the Haflinger wheel hubs nicely with the smaller m10 studs right against the outside edge of the hole. I did some very minor clearancing of the center hole and they are now hubcentric too. I used them with plain flange nuts but have considered using wobble nuts with them also. The holes are not countersunk at all.

TR7 Spoker wheels.jpg
TR7 Spoker wheels.jpg (46.75 KiB) Viewed 2167 times

1971 Pinzgauer 710M

Disc Brake Conversion Kits for 710 and 712 Pinzgauers

Great Britain
Posts: 361
Joined: Wed Feb 27, 2013 1:09 pm
Location: Lewes,Southern England

Re: 4x100 and wobble nuts?

Post by Heinkeljb » Thu Apr 19, 2018 1:40 pm

As the Haf is low speed, it shouldn't be too much of a problem as long as you regularly check them for tightness. Are your wobble nuts, flat or conical where they touch the wheel holes? Flat would be better if your wheels do not have countersinks on the holes.


Posts: 237
Joined: Thu Oct 10, 2013 8:18 pm
Location: Mt. Hope, Ont., Canada

Re: 4x100 and wobble nuts?

Post by 63rover » Sun Apr 22, 2018 7:08 am

Is your safety not worth doing it right? Not to mention that if anything goes wrong and someone else is injured (especially your little mechanic's helper). :shock:

User avatar
Posts: 407
Joined: Sat Oct 06, 2012 6:49 am
Location: Canberra Australia

Re: 4x100 and wobble nuts?

Post by Garrycol » Sun Apr 22, 2018 8:00 pm

Going from 98mm to 100mm with wobble nuts on a Haflinger would be fine - now I would not consider on something like a Corvette or Ferrari but on a Haflinger no issues.

Just make sure the shape/contour of the wobble nit matches the wheel hole. I bought a set of 12" Minilites that I thought were 100mm and use wobble nuts but they turned out to be 110mm so too big. I could redrill the rims but am going to use wheel adapators and widen the track a little which will improve stability and not load the hubs too much.

1973 Haflinger AP700
1977 Landrover FC 101
2007 Range Rover Sport TDV6
1971 Jaguar Series 3 E-Type Conv
1957 Landrover 88" Station Wagon
1957 Landrover 88"

Post Reply