Ok had a leak coming from the oil filter. Took the metal cap off and determined it was the seal. When going to grab a replacement from a new filter I notice it is extremely thinner and paper not rubber. The original one is maybe .150" thick rubber and the replacement Is at best .050" paper. I know that it is specked for a Mann c8246 but I can only get Baldwin p106-hd filters locally
So my question is can I use the thin paper one, do need to order a Mann hoping it has the correct one or do I have to find a replacement seal by its self.
Here are a few pics
Oil filter seal
Moderator: TechMOGogy
- westernair
- Posts: 748
- Joined: Sat Jan 01, 2011 11:14 pm
- Location: Tacoma, WA
Oil filter seal
Shawn
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
- westernair
- Posts: 748
- Joined: Sat Jan 01, 2011 11:14 pm
- Location: Tacoma, WA
Re: Oil filter seal
Humm digging through my spars I found one in the valve cover gasket stack.
Still interested in knowing for future.
Still interested in knowing for future.
Shawn
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
-
- Posts: 364
- Joined: Sun May 30, 2004 2:16 pm
- Location: Sheridan, Oregon
- Contact:
Re: Oil filter seal
Shawn,
My cross-references for the cartridge-type Haflinger oil filters are as follows:
Mann H 601
Mahle OX 42
NAPA Gold 1314
Of the three, only the NAPA filter comes equipped with the large flat O-ring you are trying to source.
Hope this helps.
Take care.
Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com
My cross-references for the cartridge-type Haflinger oil filters are as follows:
Mann H 601
Mahle OX 42
NAPA Gold 1314
Of the three, only the NAPA filter comes equipped with the large flat O-ring you are trying to source.
Hope this helps.
Take care.
Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Oil filter seal
In the past I just ordered a handful from Robert so I have them in stock
http://www.puch500.at/?action=dichtungen
dip 38 (501.1.07.060.1)
http://www.puch500.at/?action=dichtungen
dip 38 (501.1.07.060.1)
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker