Page 1 of 1
Front Case Question
Posted: Tue Sep 08, 2015 12:17 pm
by TechMOGogy
Well actually about the the intermediate case - what is #19 for?
- 9-8-2015 1-15-01 PM.jpg (102.63 KiB) Viewed 4582 times
Re: Front Case Question
Posted: Tue Sep 08, 2015 12:36 pm
by Jim LaGuardia
Front drive engagement fork pivot.
Re: Front Case Question
Posted: Tue Sep 08, 2015 12:46 pm
by TechMOGogy
Is how to adjust it in the manual - didn't see it but may have missed it?
Thx
Re: Front Case Question
Posted: Tue Sep 08, 2015 2:11 pm
by Jim LaGuardia
My advise is to count the turns out and use that as starting point to adjust fork/collar centering.(only final adjust after mated with central tube/drive line). The pin centers and limits side play of collar, 1-1/12 turns out from seated (while engaged)should work fine.
It will not engage if off center
Re: Front Case Question
Posted: Tue Sep 08, 2015 2:21 pm
by TechMOGogy
Thx Jim!