Snorkel

Erik712m · Post by **Erik712m** » Tue Mar 03, 2009 6:24 pm

Can any one give me the part numbers for the inside and outside mounting hardware for the p80 snorkel? The part that is connected to the inside and out side of the upper body panel.

Thanks

Erik

Ugo · Post by **Ugo** » Wed Mar 04, 2009 2:27 am

There is a full parts catalog (scanned by Dave Dunn) in the td pinz yahoo group.
If you can't find the numbers in there, I can look at my paper copy; just let me know.

Regards,
Ugo

Profpinz · Post by **Profpinz** » Wed Mar 04, 2009 2:36 am

The external grille is P/N: 716.1.70.031.1 (It's called a "Cover" in the manual)
The internal molding is P/N: 716.1.70.030.1 (It's called an "Air Induction" in the manual)

Erik712m · Post by **Erik712m** » Wed Mar 04, 2009 9:58 am

Peter, Hi Thank you I was able to order.

Ugo, I don't own a TD Pinzgauer nor does it look like there is one in my future. There for I really don't see the point in joining the TD yahoo group. I would be one of those contributors that make comments like that (looks great) but offers very little more. A waste of all your guys time really.

I have no idea who has joined? But I bet some of the forum whores are on there. Ready to cheer!
Erik

Ugo · Post by **Ugo** » Fri Mar 06, 2009 4:26 am

Erik712m wrote:Ugo, I don't own a TD Pinzgauer nor does it look like there is one in my future. There for I really don't see the point in joining the TD yahoo group.

Hi Erik, you're right. No need to join the TD group if you don't have a TD ... it does make sense!
Should you need more info about TD parts, just ask. I (or the other guys here who have the manuals) will help you.

Ugo