MSD Ignition up for graps -- SOLD

All things not relating to the other forums.
Post Reply
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

MSD Ignition up for graps -- SOLD

Post by rmel »

Cleaning out the garage, found this MSD ignition kit for a Pinz. It was one of several boxes that came
with my truck years back. I have no idea of the history or condition, I have no use for this with EFI.

The distributor is MSD PN 8485, VW Air cooled Type 1, the Ignition unit is Model 6A which is correct for
this distributor. The coil also correct for this system, but has some "dings" in the case. It may be OK but
maybe be better suited as a backup. No guarantees but looks to be in excellent condition.
MSD_ignition.JPG
MSD_ignition.JPG (811.11 KiB) Viewed 1846 times
Interested, PM me, $250 or OBO.
Last edited by rmel on Wed Nov 16, 2016 11:46 am, edited 1 time in total.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: MSD Ignition up for graps

Post by rmel »

Well, no takers :( I did take the cap off and it is a Hall effect pick up no points or condenser.
It's going to be far better than a stock setup and I hate the idea of this collecting dust in the
garage. Any interest make an offer.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
Brickren
United States of America
Posts: 183
Joined: Wed Jan 02, 2008 1:39 pm
Location: NW Pa.
Contact:

Re: MSD Ignition up for graps

Post by Brickren »

Pm'd
1975 710M
2000 Ural Tourist
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: MSD Ignition up for graps -- SOLD

Post by rmel »

SOLD
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
Post Reply