Page 1 of 1

Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Fri Jan 08, 2021 1:24 pm
by Kernman
I’m gonna have Andre come up and do a drivetrain once over to make sure my 712 is good to go for long range expedition travel plans. He suggested contacting other owners close to me about their participation. I’m in central Washington. Any takers, dates preferred?
Kernman
73 712M

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Fri Jan 08, 2021 1:27 pm
by Kernman
I’ll also have lots of chassis parts available.

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Sat Jan 09, 2021 2:37 pm
by Jim Molloy
Central Washington as in Leavenworth?

Jim Molloy
Waldersee Farm
Sheridan, Oregon
http://www.northwestmogfest.com

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Tue Jan 12, 2021 9:16 am
by Kernman
About an hour south of Leavenworth in Ellensburg.

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Tue Jan 12, 2021 1:30 pm
by Jim Molloy
Just curious. There is a home in Leavenworth with a Pinzgauer 710 and a pair of Swiss Army G-wagens. We drove by their place twice last October but, out of courtesy, did not stop to pound on their door. Tempted to be sure! A group of us have held two Haflingertreffen Nordamerika gatherings in years past and are anticpating a European high mobility vehicle gathering there sometime next fall...if possible.

Please consider attending our Northwest MogFest event August 19th-22nd. We are all hoping to be back to some degree of normal activities by that point.

Take care and best wishes for a successful Pinzgauer tech gathering.

Jim Molloy
Waldersee Farm
Sheridan, Oregon
http://www.northwestmogfest.com

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Wed Jan 13, 2021 9:21 am
by Kernman
Appreciate it. I had planned on attending last year until the cancelation and it's already on the calendar for this year. Please let any owners your in contact with to jump in for this session. I was hoping to get Andre up here sometime this spring. He's a ways out on travel.

Re: Northwest Tech/Service Session with Andre of Fat Fabrications

Posted: Wed Jan 13, 2021 6:58 pm
by Jim Molloy
You will likely be hearing from the owner of a Rebel Alliance 712K Pinzgauer who lives in Vanouver, WA.

See you THIS August...if not earlier.
Take care.
Jim