Page 1 of 1
Any 710 owner with a tape measure!
Posted: Fri Feb 02, 2024 3:23 pm
by junglefever
Hello all Pinz people. I am hoping someone with a 710 soft top can help with something quite simple and will help me avoid a costly mistake. I am in need of some quick measurements of a 710. I am going to put lettering and logos on the side of my rig used for big cat research in Africa but I don't dare order the lettering and decals without knowing the max sizes I can use. I am in USA and my Pinz is impatiently awaiting my return to Africa. Can anyone help? I have included a photo with some mark ups to show what measurements I need. All color coded so easy to get it right. Any help would be greatly appreciated.
Re: Any 710 owner with a tape measure!
Posted: Fri Feb 02, 2024 3:49 pm
by Heinkeljb
Sorry not able to help with any measurements - I own Haflinger! I would just like to point out that there is no attached photo therefore, no one knows what measurements you want.
John
Re: Any 710 owner with a tape measure!
Posted: Fri Feb 02, 2024 4:41 pm
by junglefever
Thanks John.. I am working on it. Didn't realize it did not attach.
Re: Any 710 owner with a tape measure!
Posted: Sat Feb 03, 2024 10:11 am
by Hugues
I can give you the front measures,
In mm 700x135 mm high
390 x 230 mm
Measured on the flat part, without bevels
I don't have my rear panels anymore, I have a box
- Screenshot_20240203_170538.jpg (906.42 KiB) Viewed 1004 times
Re: Any 710 owner with a tape measure!
Posted: Sat Feb 03, 2024 3:21 pm
by junglefever
Hugues...Thanks for the response. Thats a good start...
cheers