Build projects, things that guys have come up with to make a Pinz better (or worse?) and aftermarket add-ons.
-
Mr Zero
- Posts: 184
- Joined: Fri Dec 11, 2009 1:28 pm
- Location: Nevada
Post
by Mr Zero »
krick3tt wrote:Be sure to lock it down. They can walk away on their own. I have had things walk away...frightening experience.
No doubt!
Take a close look and you'll see I've got Masters in there! Great point Morris.
-
berger
- Posts: 1169
- Joined: Fri Jan 20, 2012 3:36 pm
- Location: Ottawa, Canada
Post
by berger »
edzz wrote:berger wrote:Nice! What do you mean by cold worked?
Mine were supposed to be here today, but Purplator screwed up!!
cold worked = bent without heating
Thanks Ed!
I guess I should have asked it differently. What did you have to bend on the mount to make it fit?
Sent from my Mobile
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
-
Mr Zero
- Posts: 184
- Joined: Fri Dec 11, 2009 1:28 pm
- Location: Nevada
Post
by Mr Zero »
berger wrote:I guess I should have asked it differently. What did you have to bend on the mount to make it fit?
A picture is worth a thousand words and all that...
-
berger
- Posts: 1169
- Joined: Fri Jan 20, 2012 3:36 pm
- Location: Ottawa, Canada
Post
by berger »
Ya, once I received them this morning I figured it out. I used a vice and a 2x4 as leverage. Not much pressure required.
- ImageUploadedByTapatalk1370298778.996847.jpg (229.26 KiB) Viewed 2437 times
- ImageUploadedByTapatalk1370298828.040136.jpg (167.39 KiB) Viewed 2437 times
- hilift.jpg (147.22 KiB) Viewed 2425 times
Sent from my Mobile
Last edited by
berger on Mon Jun 03, 2013 6:47 pm, edited 3 times in total.
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
-
Mr Zero
- Posts: 184
- Joined: Fri Dec 11, 2009 1:28 pm
- Location: Nevada
Post
by Mr Zero »
berger wrote:Ya, once I received them this morning I figured it out. I used a vice and a 2x4 as leverage. Not much pressure required.
Looks good!