bleeding clutch
-
- Posts: 206
- Joined: Mon Sep 28, 2009 11:36 am
- Location: WHIDBEY ISLAND
bleeding clutch
Where is the plug for bleeding the clutch ? I can't find it and if i could find it it looks very crowded up there, is there a trick or technique for accessing? The fluid in the clutch reservoir looks dirty or i would not even be asking this question, Thanks
Re: bleeding clutch
The bleeder valve is on the slave cylinder just above the starter.
The red arrow points to it in the photo below. Starter shown is the gear reduction starter from IE. It's a bit tighter in there with the original starter.
The red arrow points to it in the photo below. Starter shown is the gear reduction starter from IE. It's a bit tighter in there with the original starter.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE
- VinceAtReal4x4s
- Admin
- Posts: 2040
- Joined: Mon Apr 12, 2004 10:36 pm
- Location: Ca. or lost in South West USA
- Contact:
Re: bleeding clutch
Why do people keep posting unrelated posts in the Tech Sessions section? I am moving this one too..
"For those who risk, life has a flavor the protected shall never enjoy"
Your donation makes this site possible!
Your donation makes this site possible!
-
- Posts: 206
- Joined: Mon Sep 28, 2009 11:36 am
- Location: WHIDBEY ISLAND
Re: bleeding clutch
Thanks for the reply and the picture. Hope it is ok to post thanks on this page.