Could someone measure the LxWxH of the inside of a Pinz toolbox of me?
Thx
Inside Dim of Toolbox
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Inside Dim of Toolbox
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: Inside Dim of Toolbox
Internal or External Tool Box?
I was just going to re-arrange stuff in my 710K's internal tool box, has a slop to the front of it:
Height = 8"
Width = 23.75
Depth = 18" (at bottom), 13" (at top)
Betcha looking for the outside box though
I was just going to re-arrange stuff in my 710K's internal tool box, has a slop to the front of it:
Height = 8"
Width = 23.75
Depth = 18" (at bottom), 13" (at top)
Betcha looking for the outside box though
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Inside Dim of Toolbox
Thanks but yes, external one
Should have specified
Should have specified
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: Inside Dim of Toolbox
Door opening- 15.5 wide x 11.5 tall. Depth of box from inner back wall to sealing lip 14 inches.
The inner side walls and top to bottom are larger, but the 15.5x11.5 is the largest item you can move through the opening.
The inner side walls and top to bottom are larger, but the 15.5x11.5 is the largest item you can move through the opening.