Why did my Pinz have fuel delivery issues

Engine troubles? Try here.
User avatar
edzz
United States of America
Posts: 1309
Joined: Tue Aug 11, 2009 12:13 am
Location: Coeur d'Alene, ID

Re: Why did my Pinz have fuel delivery issues

Post by edzz »

whitesik wrote:Forgive my newby ignorance but what is the crank sensor? Are you referring to the 4500 module?
His truck is not stock, has aftermarket fuel injection etc.
Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Why did my Pinz have fuel delivery issues

Post by TechMOGogy »

So the part I ordered seems not to be the part that was installed. Need to figure it out so I can have a spare.
Regardless, checked the old crank sensor, cleaned it, checked wiring, cleaned up a few things on the tone wheel and Pinz is back in action,
511D5F48-D8F0-47FF-B2C9-67571A26B3DC.jpeg
511D5F48-D8F0-47FF-B2C9-67571A26B3DC.jpeg (800.38 KiB) Viewed 3148 times
5ABBB548-FC26-426A-8EC4-34327EB12004.jpeg
5ABBB548-FC26-426A-8EC4-34327EB12004.jpeg (1.29 MiB) Viewed 3148 times
Here is the part I need. No part numbers on it and it is not the Wells SU4214 as that is what I ordered and the plug is a bit different (and the diameter is larger so does not fit the bracket)
F16CAC33-576A-4CE9-A59F-989A3A08D7BB.jpeg
F16CAC33-576A-4CE9-A59F-989A3A08D7BB.jpeg (1.49 MiB) Viewed 3148 times
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
one2many
Australia
Posts: 178
Joined: Sun Dec 22, 2013 5:53 pm
Location: Melbourne Australia

Re: Why did my Pinz have fuel delivery issues

Post by one2many »

I reckon that crank angle sensor is from Subaru EJ20&EJ22 engines and could be either the crank or camshaft angle sensor, there was however a couple of slight plug variations between the Various series engines, I think yours maybe a camshaft angle sensor from a series three EJ20/22. In Australia these engines were used in the Impreza and Liberty/Legacy years 1991ish well into the 2000's. Maybe take some measurements of it.
Have you asked Jim.L?
Happy hunting.
1985 pinzgauer 712K factory 2.7lt civilian (RHD, 4 door K)
1979 Volvo tgb 1314a (under construction to om606 diesel/722.6 trans. Dual cab/tray)
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Why did my Pinz have fuel delivery issues

Post by TechMOGogy »

Thx
Looks like it is a su4012
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Why did my Pinz have fuel delivery issues

Post by TechMOGogy »

TechMOGogy wrote:Thx
Looks like it is a su4012
Just to update - installed the new SU4012 on Monday and Pinz is driving like new again :)
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
one2many
Australia
Posts: 178
Joined: Sun Dec 22, 2013 5:53 pm
Location: Melbourne Australia

Re: Why did my Pinz have fuel delivery issues

Post by one2many »

I gotta know....is it a Subaru EJ20/22 sensor?
1985 pinzgauer 712K factory 2.7lt civilian (RHD, 4 door K)
1979 Volvo tgb 1314a (under construction to om606 diesel/722.6 trans. Dual cab/tray)
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Why did my Pinz have fuel delivery issues

Post by TechMOGogy »

one2many wrote:I gotta know....is it a Subaru EJ20/22 sensor?
Yup you nailed it :)
Thx
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
User avatar
Jimm391730
United States of America
Posts: 1456
Joined: Wed Apr 14, 2004 10:58 pm
Location: Idyllwild, CA

Re: Why did my Pinz have fuel delivery issues

Post by Jimm391730 »

Interesting trivia: The shop that helped to get the EMS EFI system set up (the one the Jim L. uses) specializes in Subaru engines for sand rails (they can get over 700HP from a twin turbo 6 cyl Subaru boxer engine!), hence the use of Subaru components...
Jim M.
712W and 710M
Post Reply