Need unobtanium!

Issues with shocks/springs, tires, steering box, stopping, etc.
Post Reply
User avatar
Andre
United States of America
Posts: 960
Joined: Fri May 12, 2006 10:41 pm
Location: Winnsboro Tx
Contact:

Need unobtanium!

Post by Andre »

So on SAV website, they show no listingfor the brass 4 way hydraulic brake line junction on the middle differential of a 712. I found one at Puch.at but wanted to check the collective parts hoarders first. Part # 7101364661
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Need unobtanium!

Post by rmel »

Try calling or email these guys https://store.fedhillusa.com/
specialize in UK and some European hydraulics. They are very responsive.
A great source for 6mm Cunifer brake line and metric flaring tools. I
don't see any 6mm line SAE flare junctions (M12x1 thread) but it may be
easier for them to order some for you than going to Puch.at.
Last edited by rmel on Sun Mar 10, 2019 12:07 am, edited 2 times in total.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
Hotzenplotz
Austria
Posts: 371
Joined: Wed Jan 18, 2012 9:07 am
Location: Vienna, Austria

Re: Need unobtanium!

Post by Hotzenplotz »

Andre

This is a standard FTE brake hydraulics connector 4 times M12x1 connector type E.
If you have a M12x1 thread drill you can make it from a block of brass or Alu
Cheers
Albert
========================
My Pinz has NEVER been with any army
Post Reply