If you have ever stripped and replaced the door rubbers you probably found removing
the underlying adhesive was no fun aka 3M's "Yellow or Black snot". Which I just did
for my 712 "gussyup" project.
Well it's pretty rare when you get a product and it performs far better than expected.
This stuff from 3M is absolutely amazing. It's citrus based and actually smells good.
After removing the rubbers (tip: use a heat gun), spay this stuff on and all that old
snot just wipes right off with no effort.
https://www.amazon.com/gp/product/B000B ... UTF8&psc=1
3M Adhesive Remover
3M Adhesive Remover
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: 3M Adhesive Remover
Did you replace with standard weather strip from SAV or something else?
_________________
Southwest Pinzgauer Association Member
1977 Austrian 712K
http://www.swpinz.com
Facebook: Southwest Pinzgauer
Southwest Pinzgauer Association Member
1977 Austrian 712K
http://www.swpinz.com
Facebook: Southwest Pinzgauer
Re: 3M Adhesive Remover
SAV
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q