Pinzgauer Radio Parts
-
- Posts: 16
- Joined: Thu Jun 16, 2016 3:22 pm
Pinzgauer Radio Parts
Cleaning out the garage and ran across some interesting Pinzgauer radio truck parts. Bought them years ago to build a crazy project and haven't had time. Difficult to price as they don't show up often.
1. [No Longer Available] Complete 710K antenna mast tubes with mounting brackets. All tube seals/wing nuts intact.
2. [SOLD] Mostly complete interior 710K radio equipment tray assembly including both mount spanner bars.
3. [SOLD] Pinzauer hub steps (pair). No wire step mesh as seen on other trucks, but a nice clean look for front wheel assembly.
Please post if you have insight on pricing.
Located in Aurora, Colorado.
PM me for offers.
Thanks.
John
1. [No Longer Available] Complete 710K antenna mast tubes with mounting brackets. All tube seals/wing nuts intact.
2. [SOLD] Mostly complete interior 710K radio equipment tray assembly including both mount spanner bars.
3. [SOLD] Pinzauer hub steps (pair). No wire step mesh as seen on other trucks, but a nice clean look for front wheel assembly.
Please post if you have insight on pricing.
Located in Aurora, Colorado.
PM me for offers.
Thanks.
John
Last edited by unimog2450 on Sat Apr 04, 2020 7:19 pm, edited 1 time in total.
Re: Pinzgauer Radio Parts
The hub steps were made by Thilo Kass in Prescott, AZ. I have a set. IIRC, they were about $175 for the pair.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE
-
- Posts: 16
- Joined: Thu Jun 16, 2016 3:22 pm
Re: Pinzgauer Radio Parts
Thanks for the info, Paul. I thought these were T-Lo's, but couldn't remember as it has been so long. Cheers!
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Pinzgauer Radio Parts
Someone will be happy to see those antenna parts!
GLWS
Dan
GLWS
Dan
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: Pinzgauer Radio Parts
Would I find a photo somewhere of how those trays go together?
Re: Pinzgauer Radio Parts
Kind of a "K" thing. I have these shelfs as per below -- PIX courtesy of SAV.
Handy for stack storing things, but they can get in the way at times.
Handy for stack storing things, but they can get in the way at times.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: Pinzgauer Radio Parts
Hi John,
I'm interested in the antenna mast tubes and the hubstep if they are still available. I'm not sure what the best way to contact here as I've PM'd 8 different people without any response.
Would you ship?
I'm in northern california.
Thanks
Kelvin.
I'm interested in the antenna mast tubes and the hubstep if they are still available. I'm not sure what the best way to contact here as I've PM'd 8 different people without any response.
Would you ship?
I'm in northern california.
Thanks
Kelvin.
Re: Pinzgauer Radio Parts
Where in Norcal are you located. Not too many pinz’y owners
Up here so kind’a wanna expand the local community
Up here so kind’a wanna expand the local community
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: Pinzgauer Radio Parts
I live in monterey bay area. The pinz will eventually make it up to the Alameda area. I see you are in northern california too and have quite a project going. Maybe we can meet up sometime, and I learn a few things.
There is a 712M in Alameda that I see quite often, parked but not driven.
There is a 712M in Alameda that I see quite often, parked but not driven.
Re: Pinzgauer Radio Parts
Just sent you a PM.
cheers
cheers
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
-
- Posts: 16
- Joined: Thu Jun 16, 2016 3:22 pm
Re: Pinzgauer Radio Parts
Update on parts:
Hub steps - SOLD
Antenna tubes - Using for my 'in progress' Gwagen restoration project.
Thanks for renewing an old thread!
Hub steps - SOLD
Antenna tubes - Using for my 'in progress' Gwagen restoration project.
Thanks for renewing an old thread!
Re: Pinzgauer Radio Parts
A bit off topic but I have a question about the shelf support in your first couple of photos. I am reassembling my shelves and I had noticed two small holes in the support and wondered their purpose. In your photo there seems to be a clamp of some type at the location of those holes. I do not see this on the parts diagram. Any idea what it is and for? Thanks and sorry to kidnap your classified.
75 Swiss 710K
Not so new owner but still a novice
W9YG
Not so new owner but still a novice
W9YG
-
- Posts: 16
- Joined: Thu Jun 16, 2016 3:22 pm
Re: Pinzgauer Radio Parts
Ha! No worries. Someone told me years ago the 'clamp' was used to hold wood handled tools like a shovel or axe. It is a leather lined metal compression clamp. Never seen any implements or any other photo documentation showing this part either. Never able to clarify its true use. Sorry I can't help more with that.