front Door adjustment
front Door adjustment
Anyone have any experience using the door adjustments on the front of a 710m? I took the door hinges off to paint the body now the doors don't align so well. I was hoping someone might have some experience with this before I just start loosening and tightening bolts.
Re: front Door adjustment
It's just a trial and error process.
And it is a huge PITA if the door seals were also replaced.
And it is a huge PITA if the door seals were also replaced.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: front Door adjustment
I found that using wood (pine) carpenters wedges helped to hold the door in position while adjusting and tightening the hinges.
Lots easier with 2 people.
Lots easier with 2 people.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE