Dash Indicator Lights not working....

Dedicated to the memory and knowledge shared by Jim Mettler - All things relating to the flow of electrons in a Pinz.
Post Reply
SparkEE
United States of America
Posts: 16
Joined: Thu Aug 09, 2018 11:33 am
Location: Georgia

Dash Indicator Lights not working....

Post by SparkEE »

All of my dash indicator lights are not working. Saw Andre last week and he was saying that it is probably the Diode box behind the dash. Looked at the Pinz Maintenance and Repair PDF files, but no mention of where this diode box is located. Any ideas or photos of where this is located before I start tearing the dash apart?

Thanks!
User avatar
pcolette
United States of America
Posts: 1640
Joined: Sun Dec 10, 2006 7:38 pm
Location: Southwest Wisconsin

Re: Dash Indicator Lights not working....

Post by pcolette »

It is not actually a "box" but is a Molex type connector with a group of diodes soldered to it.
Part # 7112850690, available from SAV.
7112850690.jpg
7112850690.jpg (54.22 KiB) Viewed 125 times


It is located under the dash behind the instrument panel and is likely cable-tied to other parts of the dash harness. You typicaly don't need to remove the dash panel.
Paul C.
_________
'73 Swiss 710M SOLD
'89 Puch 230GE
Post Reply