Page 1 of 1

Origin of my Pinz... How do I know?

Posted: Sun Jun 18, 2006 9:44 pm
by 712ambinca
Kinda new to Pinzgauers, and have learned that the country of origin is very important, So how do I know where it came from??? (i.e. swiss, austrian, etc...) Thanks in advance....Mike

Posted: Sun Jun 18, 2006 9:56 pm
by M Wehrman
If you have pushbuttons on dash...= Swiss. Now about that amb...PM me...

Posted: Sun Jun 18, 2006 10:08 pm
by David Dunn
It's an Austrian...Split windshield and has fuses.

Posted: Sun Jun 18, 2006 10:40 pm
by 712ambinca
what would the push buttons control??? It has fuses and a slit windshield... are austrian vehicles considered junk? Mine seems to be in great shape...

Posted: Sun Jun 18, 2006 11:18 pm
by David Dunn
The "push buttons" were circuit breakers. The Austrian trucks were usually not care for as well as the Swiss. Most all the Swiss Pinzes were rebodied and have less rust.
Look at the bed of the truck, what the shelter sits on, those are prone to heavy rust because of the moisture that stay in there. I looked at an AMB years ago, and most of the panels in the cargo area were almost gone.

The Swiss opted against some options, your truck has the brackets to fold and hold the windshield down.

Looking at the pics from ebay, your truck has a serious problem with rust where the rub rails were ( all the nutsert holes), and the right door appears to have problems too.

Dave Dunn

Posted: Mon Jun 19, 2006 12:58 am
by 712ambinca
I see..., the door just has surface rust where the paint is chipped, it does have rust where the rub rails mounted, If theres no rust under the bed does that make it ok then??? or will it always be looked down on for being austrian??? Thanks for all your info so far!!!