Upgraded 55amp alternators

lindenengineering · Post by **lindenengineering** » Mon Mar 12, 2007 9:31 pm

Just a heads up that I have comissioned some more stator rewinds for alternator uprates for limited quantity delivery.

These will be built into reconditioned Bosch units giving out a rated 55amps and ready within the month.
Dennis
lindenengineering.com

Erik712m · Post by **Erik712m** » Mon Mar 12, 2007 9:33 pm

Hi Dennis Put me on the list.

pcolette · Post by **pcolette** » Mon Mar 12, 2007 11:35 pm

Hi Dennis,

Do you have a price on them available yet?

Thanks,

Paul

lindenengineering · Post by **lindenengineering** » Tue Mar 13, 2007 6:08 am

The price projection is about $450 a pop for a rebuilt exchange unit containing the upgraded stator.

Price is very much dependant upon quantities. Due to the limited amounts of stators available the price is dictated by limited numbers.
Dennis

hrafn · Post by **hrafn** » Tue Mar 13, 2007 5:10 pm

Hi Denny,

And what might be the price if I provided a complete alternator? I am
asking for the price of the rebuild and the stator rewind.

Best regards,

Kiwibru · Post by **Kiwibru** » Tue Mar 13, 2007 6:31 pm

I would like that comparison price too!

Jim LaGuardia · Post by **Jim LaGuardia** » Tue Mar 13, 2007 7:19 pm

If you notice guys, it says $450.00" exchange"

The question should be will the stator be available by itself, and if so how much(exchange of course)?

lindenengineering · Post by **lindenengineering** » Tue Mar 13, 2007 7:22 pm

Gents
That is the price rebuilt with a rewound stator, reg, bearings etc. Then runup on a bench tester and load proved. Basically so that the smoke don't come out.
Dennis
ps Don't cha know ion my best paddy acent dat aul wure come with smoke biltin tha copper, whaata craick as John(Euan) would say as he showtes down them uiores. Top o the morning to yah. Have a pint thuis wikend and toast th' emeerald isle.
D

jchobby · Post by **jchobby** » Fri Mar 30, 2007 10:10 am

I'm interested. Hope all is well. Jamey

lindenengineering · Post by **lindenengineering** » Tue Apr 03, 2007 10:51 pm

Jamey
I have the first one back of this batch.
Rated at 70 amps on the test bed, I am ready to do a function test on a truck to prove their worth at this rating.

Three guys have first dibs, I will have more ready soon providing I can get cores.
Dennis

jchobby · Post by **jchobby** » Wed Apr 04, 2007 10:53 am

Dennis, I am going to Lake Placid this weekend, and could get the alt off and send it to you. How long does it take, or do you exchange? I was trading emails with Pat from Alaska recently. Did he ever come by? He is interested in the Rancho Shock like you put in mine. Jamey

lindenengineering · Post by **lindenengineering** » Wed Apr 04, 2007 8:08 pm

Jamey
The best way to do it is by exchange since I am forced to charge $350 core charge.
The change out is as usual mechanically BUT you will need and hour or so of extra time to install a new wiring sub harnness from the alternator to the starter B+ve post. This is included at no extra charge and has full instructions on how to do it.

Reason:- Simple, with the "umpff" of AMPS that puny Molex connector and the 14 guage wires don't stand a chance in hell of handling that level of current. It would let the smoke out in short order!.
Let me know if you want one by contacting me by Email or phone
720 344 1877.
Best regards
Dennis

Erik712m · Post by **Erik712m** » Thu Apr 19, 2007 10:25 am

Dennis, Do you have any of this completed and instock?

lindenengineering · Post by **lindenengineering** » Thu Apr 19, 2007 8:56 pm

Erik
I am being swamped with orders and too few cores to get upgraded. You are third on my list. I have another batch in next week I will contact you once I have one for you and the sub kit made up.
Cheers mate
Dennis

THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Upgraded 55amp alternators

Upgraded 55amp alternators

Dennis have you made the order yet?

Alt upgrade