Page 1 of 1
Seat Belt in rear (E Track)
Posted: Mon Feb 18, 2008 5:59 pm
by critter
E Track
"Track is 5" wide, holes are 1/4" and 2" apart "
Is this a standard size and does anyone carry it in one piece lengths that would fit my Pinz.
Bob
Posted: Mon Feb 18, 2008 7:31 pm
by pcolette
I got mine from
www.MackieEnterprises.com. They have an Ebay store with everything you need. Also Scott at Expedition Imports carries the fittings and very nice seat belts, possibly the track also.
Paul
Posted: Mon Feb 18, 2008 8:20 pm
by undysworld
Ebay, $12.95 per 5 ft. section.
Sorry, but I don't know how to give you a link.
Paul
E-Track
Posted: Tue Feb 19, 2008 3:43 pm
by Heed
I also got mine from Mackies. They were very good and quick with shipping. I was able to get a couple of 7' lengths from them, alongwith various fittings.
seatbelts
Posted: Tue Feb 19, 2008 4:29 pm
by texas pinzgauer
I went to
www.seatbeltsplus.com and ordered 4 belts (friction type) in military green with all mountng hardware included for like $100 including shipping. I used existing holes for mounting them and they have worked out very well for us.
Posted: Thu Feb 21, 2008 12:26 pm
by Jimm391730
McMaster Carr has 5' and 10' pieces; ten feet, powder coated, is $31.45. Nice to use one continuous piece.
I bought cheap seat belt sets from Surplus Center (IIRC), I bought the Etrack D rings and cut off the belt, then had a harness maker sew the belts to the Etrack links. Might be cheaper and easier to get them from Scott! Etrack belts work well, though; strong, easy to remove, and with Etrack cargo straps you can tie things down securely in the truck.
Jim M.