Page 1 of 2
throttle linkage broken?
Posted: Thu Jun 21, 2012 9:05 am
by stiffler4444
Hi all,
Last night before bed, I attempted to move my 710m into the garage. While depressing the pedal, I lost all resistance, just has return spring functioning now. I looked under the truck, assembly is all there and the hand throttle is still working in conjunction with the pedal. Due to the hour was unable to get into the engine compartment.
Just wondering if I'm looking at a simple disconnection of the throttle cable at the carbs, or am I in for more of a process?
I will be fixing (hopefully tonight), but have never had to mess with this part of the truck (carbs and surrounding fixtures).
As well, I do have manuals, just looking for that reassurance that I won't be out there all night, I guess......
Couldn't find much specific on the search to this linkage, or I wasn't understanding terminology, one of the two......
Much appreciated, Dave
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 9:15 am
by undysworld
Dave,
The carb links use some plastic (nylon?) ends, and perhaps one simply broke? That's my guess.
If my memory is correct, they are used in the linkage back to the engine. There is a pivot arm mounted on the #3 valve cover, which then links to the two carbs. If you've lost throttle entirely, I'd expect the linkage broke between the pedal and the pivot arm.
You'll likely have to pull the doghouse to see them. They wear out too, so you probably will want to stock spares.
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 9:24 am
by stiffler4444
Great, thanks! That's kind of what I was thinking, but now I know what to look for.
tx Dave
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 10:30 am
by krick3tt
Not an expensive part but important.
From SAV catalogue:
BALL JOINT CARB LINKAGE
Part No.: 9014708/
Group: 08-15-10 ยป Drawing
Price: 2.26 US$
Availability: IN STOCK
Condition: NEW
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 10:37 am
by stiffler4444
Thanks for the reference point, I'll order some up.
Dave
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 5:04 pm
by stiffler4444
Yup, broken linkage at the ball pivot.....on order! Thanks for the replies!!!
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 10:18 pm
by edzz
replace them all, and buy an extra to leave in the glove box.
Re: throttle linkage broken?
Posted: Thu Jun 21, 2012 11:40 pm
by stiffler4444
edzz wrote:replace them all, and buy an extra to leave in the glove box.
for sure, and at that price, I'm happy to.
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 7:21 am
by berger
Hey Dave.
Which one broke? The main linkage going to the pivot?
I am going to pick up a few spares too.
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 7:28 am
by stiffler4444
The one on the same mechanism as the hand throttle broke. Snapped into 3 pieces. I planned on picking up a few from SAV, but in an attempt to salvage my camping trip next weekend, I'm going to try Karl first.
tx Dave
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 9:18 am
by berger
Just ordered a couple. Thanks for the post...wouldn't have thought to have spares for the linkage.
Hopefully you can get some before your trip. If PC doesn't have them, SAV does offer speedier shipping, of course it costs more....but they are small enough to fit in an envelope.
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 9:30 am
by stiffler4444
Ya, I am only concerned with the customs issues.....might get tied up for a while. Might be my only route though....
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 12:30 pm
by berger
stiffler4444 wrote:Ya, I am only concerned with the customs issues.....might get tied up for a while. Might be my only route though....
I haven't had any issues ordering from SAV or EI. Generally takes 7-15 days. Both use USPS so you won't get stuck with UPS brokerage...you may even avoid tax, if it is under $25 (I think that is the value). If you are close to a border crossing, you could probably get it shipped to a UPS store quite quickly. I am only 45 minutes to Ogdensburg, NY and I do that occasionally.
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 12:36 pm
by stiffler4444
Ya, I'm 10 minutes from the Peace Bridge, could call them and order. I have a place in Lewiston that takes packages for us Canadians....I tried online and my credit card info won't jive with an American delivery address.....
Re: throttle linkage broken?
Posted: Fri Jun 22, 2012 12:58 pm
by berger
stiffler4444 wrote:Ya, I'm 10 minutes from the Peace Bridge, could call them and order. I have a place in Lewiston that takes packages for us Canadians....I tried online and my credit card info won't jive with an American delivery address.....
Call SAV. They might be able to help with that. I just placed an order with them for the linkage, plus a few other things I needed....and they called me back to double check that I actually needed all that I ordered....Turns out I didn't, and my bill dropped by $40 US! Great customer service.
From my relatively newbie experience in the Pinz world, both SAV and EI go above and beyond to help their customers.