Page 1 of 1
Suppressing ignition noise on 24v audio
Posted: Wed Oct 31, 2012 8:39 pm
by audiocontr
I have a significant, audible ignition tick through my 24v amplifier. I have to guess that the pinz had a lot of thought to keeping ignition noise out of the radio system - is this suppression lost when converting to the civilian ignition? Any other tips on pulling ignition noise out of electronics?
Re: Suppressing ignition noise on 24v audio
Posted: Wed Oct 31, 2012 9:20 pm
by berger
I have the civi setup, and I am running a 12v amp through a converter plugged into the accessory plug. No issues with ignition noise.....just the noise of the truck!!
Re: Suppressing ignition noise on 24v audio
Posted: Wed Oct 31, 2012 9:31 pm
by krick3tt
Civi setup...24 to 12 converter...just the noise of the truck. No radio interference.
Re: Suppressing ignition noise on 24v audio
Posted: Thu Nov 01, 2012 10:17 am
by McCall Pinz
I'm running a 24v amp wired into the radio outlet with a pertronix ignition without any noise.
Re: Suppressing ignition noise on 24v audio
Posted: Thu Nov 01, 2012 12:02 pm
by audiocontr
dang =)