Seat Belt in rear (E Track)

critter · Post by **critter** » Mon Feb 18, 2008 5:59 pm

E Track

"Track is 5" wide, holes are 1/4" and 2" apart "

Is this a standard size and does anyone carry it in one piece lengths that would fit my Pinz.

Bob

pcolette · Post by **pcolette** » Mon Feb 18, 2008 7:31 pm

I got mine from www.MackieEnterprises.com. They have an Ebay store with everything you need. Also Scott at Expedition Imports carries the fittings and very nice seat belts, possibly the track also.

Paul

undysworld · Post by **undysworld** » Mon Feb 18, 2008 8:20 pm

Ebay, $12.95 per 5 ft. section.
Sorry, but I don't know how to give you a link.
Paul

Heed · Post by **Heed** » Tue Feb 19, 2008 3:43 pm

I also got mine from Mackies. They were very good and quick with shipping. I was able to get a couple of 7' lengths from them, alongwith various fittings.

texas pinzgauer · Post by **texas pinzgauer** » Tue Feb 19, 2008 4:29 pm

I went to www.seatbeltsplus.com and ordered 4 belts (friction type) in military green with all mountng hardware included for like $100 including shipping. I used existing holes for mounting them and they have worked out very well for us.

Jimm391730 · Post by **Jimm391730** » Thu Feb 21, 2008 12:26 pm

McMaster Carr has 5' and 10' pieces; ten feet, powder coated, is $31.45. Nice to use one continuous piece.

I bought cheap seat belt sets from Surplus Center (IIRC), I bought the Etrack D rings and cut off the belt, then had a harness maker sew the belts to the Etrack links. Might be cheaper and easier to get them from Scott! Etrack belts work well, though; strong, easy to remove, and with Etrack cargo straps you can tie things down securely in the truck.

Jim M.

THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Seat Belt in rear (E Track)

Seat Belt in rear (E Track)

E-Track

seatbelts