Merry Christmas

Erik712m · Post by **Erik712m** » Sat Dec 19, 2009 9:13 pm

This is why I needed the trailer info.

Nothing like caroling in while being towed behind a Pinzgauer.

dr4yrk9 · Post by **dr4yrk9** » Sat Dec 19, 2009 9:21 pm

erik, you are having too much fun decorating your pinz

. Merry christmas to everyone on the forum!!!!

David Dunn · Post by **David Dunn** » Sat Dec 19, 2009 10:22 pm

Heck, if I knew that was what you wanted it for, I would have told you to hang 2 red lanterns from the ramp.

Erik712m · Post by **Erik712m** » Tue Dec 22, 2009 5:28 pm

I thought the peppermint lights would be enough. Until I called the neighborhood cop and asked what he thought.

Never the less he made the suggestion better at least make sure the trailer lights work so that wouldn't be on the ticket.

Still made it home with out a ticket. just made everyone get out and get in the back of the pinz, before we crossed any major streets.

4x4Pinz · Post by **4x4Pinz** » Tue Dec 22, 2009 7:47 pm

Now that you have time and to avoid troubles in the future you need to acquire these

http://www.pinzgauer.com/showdetails.ph ... no=SAV1004

http://ecx.images-amazon.com/images/I/5 ... AA280_.jpg

and a couple 24v light bulbs. This is assuming you have already converted to the 2"sq receiver hitch, if not shame on you:)

I can tow any trailer I am comfortable towing with this setup, no need for special wiring connectors or any of that BS.

David Dunn · Post by **David Dunn** » Tue Dec 22, 2009 8:40 pm

4x4Pinz,
That connector sold by SAV is the same as used by Range Rover, only prewired for the typical flat 4 trailer connector( though more money). A fast plug and go for the less electrical inclined.

And as far the wiring connectors BS. I have 9 vehicles of different eras and makes with 4 different sockets and 6 trailers with 3 different connectors. These adapters make it easy to move the different trailers with any of my vehicles, at any time. The magnetic lamps are fine for most trailers,but they don't stick to aluminum and trailers without a flat surface.
I have been on several MV boards and solve trailering problems for different vehicles and trailers in a permanent fashion without devaluing either, yours is only good for a Swiss Pinz. Many here tow their trailers with more than just a Pinz.