I’m getting ready to rebuild my carburetors and need to buy a carburetor synchronization tool. What is the best? Don’t really want to spend a lot however I’ll spend what I must to get a good tool. Anyone have opinions on accuracy and ease of use of different models?
Thanks Ed
What is best carb sync tool under $100?
What is best carb sync tool under $100?
Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
-
Jim LaGuardia
- Posts: 1707
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
They are around $55 http://www.expedition-imports.com/produ ... ester.html
-
lindenengineering
- Posts: 715
- Joined: Sat Apr 17, 2004 6:14 pm
- Location: Golden Colorado USA
- Contact:
Cheapest sync tool!!!??
A piece of rubber hose that will fit into "yur earole"!
Should be about 3 feet long and cost you about $5 from Napa.
Place it at the side of the throat and listen to the roar when the engine is running then sync the rest up achieving the same roar!
That is an old sage's tool from the 1950's and 60's. I was taught how to do this on multi banks of SU's fitted to E types and Daimler V8 Darts--don't "larf" it works!
Trivial question?
Faced with a Jag V12 and four SU's or Strombergs, what's the order of tune on the four carbies?
Dennis
A piece of rubber hose that will fit into "yur earole"!
Should be about 3 feet long and cost you about $5 from Napa.
Place it at the side of the throat and listen to the roar when the engine is running then sync the rest up achieving the same roar!
That is an old sage's tool from the 1950's and 60's. I was taught how to do this on multi banks of SU's fitted to E types and Daimler V8 Darts--don't "larf" it works!
Trivial question?
Faced with a Jag V12 and four SU's or Strombergs, what's the order of tune on the four carbies?
Dennis
OOOps no customer bashing now
STE BK
on on ebay -> 280499468178
& to make it work...
http://real4x4forums.com/PinzgauerBBS/v ... php?t=5056
& to make it work...
http://real4x4forums.com/PinzgauerBBS/v ... php?t=5056