710 Pinz on a car lift

[berger]

I tried searching for this topic, but no luck. When I get my truck, I am going to have to bring it to a garage for a safety inspection. Since the mechanics will need to remove the wheels to inspect breaks etc, how would they lift a Pinz in the shop? Can they use those hydraulic lifts with the arms, and if so, where do they position them on the axles, body etc?

Thanks!

[M Wehrman]

I have an above ground lift and I have lifted all my Pinzs' by placing the arms under the lip below the rub rails. one arm above the ft wheels,and the other down the side wherever it reaches. Never had any issues.

Mark

[berger]

I have an above ground lift and I have lifted all my Pinzs' by placing the arms under the lip below the rub rails. one arm above the ft wheels,and the other down the side wherever it reaches. Never had any issues.

Mark

Thanks Mark.